Serra Laser Center
CAPABILITIES
LASER CUTTING: We use four high accuracy Mitsubishi Laser Machines. Positioning tolerance is .00039, with a repeatability of .00019. We chose Mitsubishi so we could provide the highest quality parts to our customers.Our company has the capability of cutting preformed shapes, tubes, channel, angle iron and REWORK OF PAINTED PARTS. We can also laser cut pre-punched parts, which can be very cost effective when dealing with complex outside patterns.
Virtually any shape that can be drawn we can laser cut. Normal sheet metal rules (i.e., punching a hole closer to the edge than a material thickness) many times don't apply to laser cutting, so seemingly impossible parts may be produced. We are very good at cutting thin material and shim stock, and thicker materials previously machined (to .500) can be cut.
Programming of the parts can be from drawing or sketch with a reduced cost when a clean, exploded .DXF file is provided. Signs can be produced using any True Type font, which can lead to some very interesting designs. Laser etching of parts can also be done.
Besides cutting a variety of different materials, we also do Laser Welding and 4th axis work, including round tubes.
Serra Laser Center only does laser cutting and we are quite responsive to the fabricator or machine shop that can benefit from our unique service.
MATERIALS LIST
| TYPE MATERIAL | MINIMUM THICKNESS | MAXIMUM THICKNESS |
|---|---|---|
| COLD ROLL STEEL | .001 | 1.00 |
| STAINLESS STEEL | .001 | 1.00 |
| ALUMINUM | .001 | 1.00 |
| COPPER | .001 | .156 |
| TITANIUM | .001 | .250 |
| QUARTZ GLASS | .025 | .500 |
| PLASTIC | .001 | 2.000 |
| WOOD | .001 | 1.000 |
| OTHER MATERIALS - GIVE US A CALL | ||
Copyright
© 1997-2001 Serra Laser Center.
All
Rights Reserved.
Virtually any shape that can be drawn can be laser cut.
